.222Rem Red-I-Laser Boresight
The Red-i-Laser boresight is the fastest, cheapest and most precise way to zero your rifle!
Haven't shot a year, dissassembled your scope from your rifle, accedently let your rifle fall or take a hit against a tree? Unsure your scope is still zeroed?
No need to shoot your expensive rounds, lose time at a shooting range again and again...
When you have your red-i-laser boresight and reference chart with you on the hunt, you can zero your rifle without the cost and any of the noise wich may set your game running away.
You only have to zero your rifle one time the rest of your life. After doing so take the following steps:
| | |
| | | 1. | Insert Red-i into the magazine or place directly into the barrel chamber by hand. | | | | | | 2. | Carefully close the rifle bolt at which time a laser beam will emit through the barrel.
Note: do not force the bolt. Do not fire the weapon with the boresight in the chamber, the firing pin may damage the laser! | | | | | 3. | Point the rifle at a surface ±25M. (Note that a shaded surface or fluorescent surface should
be chosen if carrying out this exercise in strong sunlight in order to enhance
the visibility of the laser dot.) | | | | | 4. | Memorize the position of the laser ‘dot’ in relation to the ‘cross hair’ of the telescope.
Using the reference chart included. (The marksmen will always know that if the red ‘dot’
is in that exact position as memorized, the rifle is zeroed at the required shooting distance. | | | | | 5. | Extract the Red-i device from the chamber exercising extreme care not to allow the device to
fall onto hard surfaces. The Red-i is an optical instrument and must be handled with care. | | | | | 6. | Replace device into the belt pouch provided or original package case. | |
| | When Red-i is used as an aiming / training tool: | |
| | | |
| | Activate the Red-i unit and aim at a target (in low light) at a distance further than 50m.
Keep the dot as still as possible, as you only now realize the movement of your barrel when aiming. | |
https://www.red-i-laser.com for more information.
https://www.red-i-laser.com/video4/video4.htm for installation instructions.
Unlike other 'cheaper' laserboresights the Red-i-Laser is perfectly centered, wich in turn means that the projected red dot wil be at the same position when your re-chamber or turn the red-i-laser time after time..
