The images are only indicative and do not represent the 45 ACP red-i-laser!
The Red-i-Laser boresight is the fastest, cheapest and most precise way to zero your weapon!
Haven't shot a year, dissassembled your scope/reddot from your weapon, accidently let your weapon fall or take a hit? Unsure your scope/reddot is still zeroed?
No need to shoot your expensive rounds, lose time at a shooting range again and again...
When you have your red-i-laser boresight and reference chart with you, you can zero your weapon without the cost and any of the noise.
You only have to zero your weapon one time the rest of your life. After doing so take the following steps:
| |
| | 1. | Insert Red-i into the magazine or place directly into the barrel chamber by hand. | | | | | 2. | Carefully close the weapon at which time a laser beam will emit through the barrel.Do not fire the weapon, the firing pin will damage the laser. | | | | 3. | Point the rifle at a surface ±25M. (Note that a shaded surface or fluorescent surface should
be chosen if carrying out this exercise in strong sunlight in order to enhance
the visibility of the laser dot.) | | | | 4. | Memorize the position of the laser ‘dot’ in relation to the ‘cross hair’ of the telescope/reddot.
Using the reference chart included. (The marksmen will always know that if the red ‘dot’
is in that exact position as memorized, the rifle is zeroed at the required shooting distance. | | | | 5. | Extract the Red-i device from the chamber exercising extreme care not to allow the device to
fall onto hard surfaces. The Red-i-Laser is an optical instrument and must be handled with care. | | | | 6. | Replace device into the original package case. | |
| When Red-i is used as an aiming / training tool: | |
| | |
| Activate the Red-i unit and aim at a target (in low light) at a distance further than 25m.
Keep the dot as still as possible, as you only now realize the movement of your barrel when aiming. | |
https://www.red-i-laser.com for more information.
https://www.red-i-laser.com/video4/video4.htm for installation instructions.
Unlike other 'cheaper' laserboresights the Red-i-Laser is perfectly centered, wich in turn means that the projected laserdot wil be at the same position when your re-chamber or turn the red-i-laser time after time...
